Meet the standards: in line with GB8410, American Standard FMVSS571.302, DIN7520 "Combustion Characteristics of Automotive Interior Materials".

Test method: the specimen is clamped horizontally on the U-shaped support, and after igniting the free end of the specimen with a flame of the specified height in the combustion chamber for 15S, determine whether the flame on the specimen is extinguished, as well as the distance of the specimen burning and the time taken to burn the distance.

Scope of application: Mainly suitable for single material or laminated composite materials used in automotive interior material parts, such as seat cushions, seat backs, seat covers, seat belts, headrests, armrests, movable folding roofs, all decorative liners, instrument panels, glove compartments, indoor cargo shelves, or rear window sill panels, curtains, floor coverings.....

Technical Parameters:

Combustion box: mirror stainless steel plate structure, steel plate thickness 1.2mm

Control box size: 300mm(length)*270mm(width)*360m(height)

Combustion chamber dimensions: W×H×D: 385x 360x 204mm

There are 10 ventilation holes with a diameter of 19 mm at the bottom, and ventilation slots with a width of 13 mm around the four walls near the top.

Test bracket: made of two U-shaped corrosion-resistant metal steel plates, with dimensions of 361x100mm long x wide

Control box: Burning time: 0~99.99/S/M/H can be set arbitrarily

Burning time: 0~99.99/S/M/H can be set arbitrarily

Stop ignition time: 0~99.99/S/M/H can be set arbitrarily

Burning lamp: Nozzle inner diameter: 9.5mm

Gas source: gas (provided by the customer)

Flame height: 38mm

Metal comb length: 110mm, 7~8 smooth round teeth in every 25mm

Steel ruler: length 400mm, accuracy 1.0mm