Used in industries such as electronics, automotive parts, plastics,
etc., to test the repeated impact tests of various materials on
high and low temperatures, and to achieve
Chemical changes or physical injuries caused by thermal expansion
and contraction of products.
This equipment is divided into three parts: high temperature zone,
low temperature zone, and testing zone. It adopts a unique heat
insulation structure and cold storage effect, which is to be tested
during testing
The object is completely stationary, and the cold and hot air path
switching method should be applied to import the sample for cold
and hot impact testing.
It can independently set three different conditions: high
temperature, low temperature, and cold/hot shock, and has the
ability to perform cold/hot shock conditions
The functions of high and low temperature testing machines. (See
Figures 1 and 3)
Low temperature zone: -50 ℃~RT size: 400 × 500 × 500mm
Test temperature: -40 ℃~200 ℃ Size: 400 × 500 × 500mm
High temperature zone: RT~250 Size: 400 × 500 × 500mm
Protection devices: compressor overload protection, refrigerant
high-pressure protection, and over temperature protection
Compressor: French Taikang compressor
Internal and external materials: SUS304 # stainless steel safety
device, internal and external materials: electrostatic painted
steel plate
Features:
Electronic and electrical components, metals, chemical materials,
automation components, communication components, national defense
industry, aerospace industry
An ideal testing tool for physical changes in BGA, PCB substrates,
electronic chip ICs, semiconductor ceramics, and polymer materials.
Adopting a large human-machine touch dialogue LCD human-machine
interface controller, it is easy to operate, easy to learn, stable
and reliable.
The impact method adopts a style switching method, which imports
the cold and hot temperatures into the testing area to achieve the
purpose of cold and hot impact testing.
The impact time is 0.1 to 999.9 hours, and the cycle time is 1 to
9999 times, which can be set.
Can set the number of cycles and defrosting times for automatic
(manual) defrosting.
Display and curve of operating status, explanation and
troubleshooting methods for displaying abnormalities and fault
points.
The European and American original high-efficiency overlapping
compression refrigeration unit is an equipment with low operating
noise and energy saving.
Adopting PID automatic calculation control function, the
temperature control accuracy is high.
It can be used for automatic loop impact or manual selective
impact, and can choose two groove or three groove type as well as
cold and hot impact.
Can independently serve as a high-temperature or low-temperature
box, with one machine for three purposes.
Adopting green and environmentally friendly (HFC) imported DuPont
refrigerants R404 and R23 with zero ozone coefficient.
Instant impact curve (see Figure 2).
Performance parameters:
High temperature tank temperature range: RT~250 ℃
Low temperature bath humidity range: -50 ℃~RT
Test chamber impact temperature: high temperature 50-200
Low temperature -10 ℃ to -40 ℃
Heating time: RT-250 ℃ for 60 minutes
Cooling time: It takes about 85 minutes to cool down by 70 ℃
Impact recovery time: High temperature 150 ℃ impact for 30 minutes
Low temperature 40 ℃ impact for 30 minutes
Impact recovery time within 5 minutes
Sample weight: 1.5kg
Within the laboratory size (W x H x D): 40 x 35 x 30cm
External dimensions of the whole machine: 140 × 180 × 145cm
Structural material: inner box: SUS304 # steel plate, outer box:
steel plate spray coating, insulation layer: PU foam, base:
national standard angle iron+channel steel
Refrigeration system: Cascade water-cooled European and American
original imported fully enclosed or semi enclosed compressor unit
Controller: Large LCD color touch human-machine interface
controller or single display LCD touch human-machine interface
controller
Safety protection device: No fuse overload protector, compressor
overheat, overcurrent, overpressure, heating dry burning, and box
over temperature alarm
System.
Standard configuration: Test holes (1 piece with a diameter of 50,
2 sets of test racks)
Power (approximately KW): 24
Power supply: AC3 ± 5W 380V 50HZ
