DX8321 pendulum pipe rain test device
Technical requirements for rain test equipment
1. Comply with standards:
The rain test equipment GB4208-93, GB10485, GB2423, 38-90,
GB4706.32-2004 and IEC60529-2001 "Enclosure Protection Level (IP
Code)" are designed and manufactured, and are suitable for the
waterproof test of electrical products with the second
characteristic number of 3 and 4 (IPX3, X4).
2. The main technical parameters of the equipment hardware
1. The voltage used by the equipment AC 220V±10%; Frequency:
50Hz±5%
2. Swing tube size: R=1200mm, meet the use of 1300*800*800mm
products of samples
3. Swing pipe material: SUS304 stainless steel (outer
diameter≥19mm, wall thickness≥2mm);
4. Drip hole diameter: ¢0.4mm, number of holes: 50 IPX3 openings,
75 IPX4 openings
5. Total water flow: IPX3: 3.5L/min; IPX4:5.3L/min
6. Nozzle angle: 120 degrees (IPX3), 180 degrees (IPX4)
7. The angle between IPX3 and IPX4 can be converted and replaced,
(method a test in three-level waterproof and four-level
waterproofing)
8. Swing angle 120 degrees (IPX3), 360 degrees (IPX4)
9. Water volume adjustment range: ≥0-10L/min (configurable)
10. The swing time (2X120 degrees) during PX3 test is 4s; The
oscillation time (2X180 degrees) was 12 seconds during the IPX4
test
11. The flow rate of each water nozzle is 0.07L/min (adjustable),
and the flow meter shows direct reading
12. Test time: 0-999min (settable)
13. Turntable diameter: ≥1600mm (height adjustable); Turntable
load: ≥200kg
14. Turntable speed: can be set
15. The water flow can be directly displayed; The water spray
pressure can be read directly by a pressure gauge or electronic
display
16. PLC + stepper motor + touch screen (PLC + stepper motor + touch
screen control system: swing angle, swing speed, and test time can
be set directly on the touch screen)
17. After the test is completed, the water in the water pipe can be
automatically removed
18. The main body of the open column equipment is made of SUS304
stainless steel
19. Provide a third-party verification certificate for the
equipment provided.
3. Other requirements:
The supplier provides free installation, commissioning and
training.
