Ignitability And Flame Spread Test Machine ISO5657

ISO5657 Introduction to Flammability Tester:

Flammability refers to the ignitability of materials, which is one of the most important characteristics of materials' combustion performance, and is the key point of any fire hazard assessment.

ISO 5657 Standards:

ISO 5657 and BS 476.

The flammability tester includes a support frame that horizontally clamps the specimen between the pressure plate and the shielding plate, so as to expose the specified area of the upper surface of the specimen to radiation. This radiation is provided by a conical irradiation furnace located above the sample support frame. The automatic pilot flame device moves the pilot flame to the correct position above the sample through the conical irradiation furnace. The sample insertion positioning tray is used to accurately position the sample on the pressure plate of the sample support frame, and the sieve plate is used to shield the sample surface when inserting the sample into the instrument.

ISO 5657 Ignitability Test Machine Main features:

 The sample direction is horizontal

 Conical irradiation furnace with radiation level of 10 to 50 kW/m2

 3-section furnace temperature controller

 Temperature indicators and over temperature protection devices

 Equipped with pilot flame and re ignition device

 A mechanical device that moves the pilot flame to the correct position above the sample every 4 seconds

 Independent support frame and control unit with flow meter

Flammability refers to the ignitability of materials, which is one of the most important characteristics of materials' combustion performance, and is the key point of any fire hazard assessment.

ISO 5657 Use requirements:

China ISO 5657-6944 Suppliers